How to fix Error Code on Printer Canon MP287
How to fix Error Code on Printer Canon MP287- If You Get Error Codes on Your Printer Canon MP287, please do not panic, just read this article and try the instructions in this article. To find the easiest solution before you take your printer to a service, it helps us try to understand in advance some of the fault code on the Canon MP287 printer and also the solution.
Not much different from the previous series, the Canon MP287 also has two types of error codes: 1. the use of the first letter P, eg P022. which uses the first letter E, for example for some Canon MP287 E03As Error code of the most common are: E 1. kode error printer canon mp287, printer canon mp287 error ,printer canon mp287 error ,printer canon mp287 error ,printer canon mp287 error ,canon pixma mp287 error code e05.
 |
| How to fix Error Code on Printer Canon MP287 |
Error codes on Canon Printer MP287:
Error Code E02
Cause: Ran out of printer paper (printer runs out of paper) or paper is not going well.
Solution: Insert paper correctly.
Error Code E03
Cause: Paper Jam (Paper jam) or Paper Output Closed. Open the Paper Output,
Solution: Reload paper correctly.
Error Code E04 or E05
Cause: Cartridge not detected / not famous with printer (FINE Cartridge can not be recognized). Cartridge must be installed properly or is not compatible.
Solution: Try to Remove Cartridge first, then plug it back by pressing the button until the cartridge snaps into place.
Error Code E07
Cause: Cartridge is not installed in the correct position (FINE Cartridge is not installed in the correct position).
Solution: Check whether Cartridge Black / Color is already in the correct position.
Error Code E08
Penybab: Ink absorber is almost full (Ink absorber is almost full).
Solution: Press the Black or Color button on your printer to Continue Printing (Resume Printing).
Error Code E13
Cause: The remaining ink can not be detected (Level Remaining ink can not be detected).
Solution: Replace the Ink Cartridge with a new and original. If you want to continue without replacing the new cartridge, press the STOP / RESET on Your Printer To 5 seconds.
Error Code E14
Cause: Unrecognized Cartridge (FINE Cartridge can not be recognized).
Solution: Replace the old cartridge with a new cartridge.
Error Code E15
Cause: Unrecognized Cartridge (FINE Cartridge can not be recognized). Cartridge not installed correctly.
Solution: Remove the cartridge and then plug it back into place until you click the Cartridge key.
Error Code E16
Cause: Ink has Run Out.
Solution: If the printer is printing the data, press the STOP / RESET for 5 seconds and then continue your print job. Change Ink Cartridge kosong.E30: The document is too small when "Copying Fit Selected", check the position of the document on the scanner glass.
Error Code E31
Cause: The printer is not connected to the computer (the printer is not connected to a computer).
Solution: Connect the USB cable from the printer to the USB port on the computer.
Error Code E50
Cause: Scanning the print head alignment sheet has failed.
Solution: Press the STOP / RESET. Make sure the paper is loaded (A4 or other size) in accordance with the print head alignment, and also paper in the correct position and not a dirty glass plate. Also make sure the print head nozzles are not clogged.
The error code P At Canon MP287 printer:
Error code P02
Solution: Cancel the print job and turn off your printer. Cleaning paper / drag associated with your printer. Maybe you Cartridge Damaged / broken. Turn your printer back.
Error code P10
Turn off your printer and then turn it back on.
Other cases are also common mistakes:
Turn the printer off and unplug the AC power cord and then plug it back into your printer so little explanation of Error Code of Canon MP287, may be useful. Thank you for visiting my website.
Report Broken Link: Contact Us
Tag :
Resetter
0 Comments for "How to fix Error Code on Printer Canon MP287"