Service tool v3200 free download
Download Resetter Canon Service Tool V3200 - Here I am sharing about the latest E08 How to Reset MP287 uses Canon Resetter Service Tool V3200.
 |
| Service tool v3200 free download |
Please Download Click Here
How to Reset Canon MP287 E08 error
Early indications:
When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And if we do a print command, the monitor screen will show "The Ink Absorber is Almost Full". Caption MP287 E08 error on the screen as follows:
Then how to cope with the Canon MP287 E08 error:
How to Reset Canon MP287 E08 error
1. Turn on the printer Canon MP287, MP287 LCD panel then will appear E08 error, and there is a description of "The Ink Absorber is Almost Full" on the screen of your monitor.
2. Download the MP287 Resetter at THIS LINK.
3. Printer Canon MP287 must be in a state of SERVICE MODE. Do I read next step.
4. Turn off the Canon MP287 E08 error by pressing the power. Do not pull the power cable
5. Press and Hold the STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
6. Remove the STOP / RESET but do not release the POWER button.
7. In the circumstances the POWER button still depressed, press the STOP / RESET 6 times.
8. Then release both keys simultaneously. Then the Canon MP287 will be in the Service Mode.
9. LCD Panel MP287 will be blank / dark and your computer will detect the new hardware. Ignore it ...
10. You still with ekohasan blog, the next step Exctract and Run Service Tool for MP287 MP287 E08 error you downloaded earlier.
11. On the menu absorber Clear ink counter select Main and then click SET to the right.
12. In the ink absorber counter menu select Main and then click SET to the right.
13. Then click EEOPROM. then the printer will print one page.
14. Canon MP287 Printer error E08 will be normal again.
Report Broken Link: Contact Us
Tag :
Resetter
0 Comments for "Service tool v3200 free download"